Tim Leary Essay -- essays research papers

Timothy Leary, also known as ‘Uncle Tim’, ‘The messiah of LSD’, and ‘The most dangerous man in America’, was born on October 22, 1920, in Springfield, Massachusetts. He went to a public high school where he discovered girls and the ability to attract attention from those in authority. After high school he attended Jesuit College Holy Cross, but Tim wasn’t satisfied with Holy Cross, so he took a test to get into West Point. He got very high marks and was accepted. Timothy was very enthused and proud to be at West Point. However, his enthusiasm faded when he realized that he was being trained not to think, but to follow. One day, on a return trip from a football game, Timothy was invited to drink with a few of the upper classmen who brought some bottles of whiskey. The illicit event was unfortunately discovered the next day, and the Cadet Honor Committee punished Tim by inflicting a kind of solitary confinement: everyone was forbidden to sp eak a word to him. A date was set for a court-martial. Timothy was aquitted in less than two minutes, which caused the disgruntled and unsatisfied Committee to maintain the silence punishment. Leary had to endure nine months of being ignored. When he became a sophomore, some of the cadet officers whom where not on the Honor Committee approached Tim to talk about the situation. They informed him that the whole business was causing morale problems. They wanted to make a deal for Tim's departure. He said that he would leave Westpoint if the honor committee would read a statement in the mess hall proclaiming his innocence. They returned two days later with an approval. Tim went back home and applied to more colleges. He was accepted to the University of Alabama where he became a psychology major. Shortly after, Tim was expelled for sleeping over at the girls’ dormitory. He was an A student. When he was kicked out of college he was sent to basic training in artillery at Fort Eusti s Virginia. The army needed psychologists, and since Tim had already started the major they let him finish his degree in the service. He was going to be stationed on an infantry boat in the south pacific. Luckily, his old friend from the University of Alabama was now the chief psychologist at the army hospital in Pennsylvania. He managed to get Tim a transfer to his hospital. 	In 1944, while training as a clinical psychologist in Pennsylvania, ... ...dia extravaganzas with live video and music. His books became graphic novels that were the products of desktop publishing and most profoundly his interests became focused towards the rise of the World Wide Web. Tim realized that this was what he was waiting for, a place where you can create and interact with your own worlds. Soon, Tim devoted his entire efforts to making his web site, http://leary.com, his home for his archives, ideas and his fans. After he learned he had inoperable prostate cancer in January of 1995, he embraced the dying experience as one of the greatest journeys of all time. He refused to become morbid and depressed over his situation. He was often entertaining guests and could often be seen at a number of events in the city in his formula one wheel chair. A home in cyberspace that can live on forever was one of Tim's last wishes. Timothy Leary was many things to many people, and he resisted most attempts to categorize himself. He often said at these times, "you get the Timothy Leary that you deserve." Overall it is accurate to call him a philosopher and a scientist, whose underlying motivations were human communication and understanding the mind.

Domestic Violence in the Lgbt Community

Domestic Violence is fundamentally different in LGBT relationships for numerous reasons. There are many causal and contributory factors that make domestic violence in the LGBT community uniquely different than male-to-female or female-to-male battering. To understand these differences one must recognize domestic violence beyond the stereotypical heterosexual manifestation. According to A Professional Guide to Understanding Gay and Lesbian Domestic Violence, same-sex battering mirrors heterosexual battering, but same-sex victims have fewer resources and are less protected.Seven states define domestic violence in a way that excludes same-gender victims. Making matters worse is the fact that in some states sodomy is still considered a crime which forces a victim to confess to a crime in order to prove a domestic relationship. Many women’s shelters refuse services or safety to same-sex victims. Since same-sex marriage is not legal, many families are not considered â€Å"real fami lies† in the eyes of the law, making it more difficult for these victims to get help. Perhaps one of the most compelling reasons LGBT domestic violence is so different is found in the unique communities of LGBT people.LGBT communities â€Å"provide social forums, rites of passage, rituals for celebration, and bodies of art and literature that combat isolation and allow us to explore our full potentials (Bartlet, 1993). † Because many LGBT people feel shunned and excluded from the American ideal, they have forged their own communities as refuge from the inequalities and persecution of mainstream America. The tools a batterer uses to maintain control, like power and control, cut across all lines of gender identity and sexual orientation, but a batterer’s behavior is always peppered with community influences.Batterers play on their victim’s vulnerabilities and community values to maintain control. The volumes of hate, hostility, and condemnation directed at L GBT people from mainstream America encourage self-loathing and internalized homophobia. It covertly forces isolation and creates a false sense of safety from within the community. And LGBT batterers manipulate those difficult realities to employ highly effective weapons against their partners. So community is a strong contributing factor to domestic violence in the LGBT community.The Frustration-Aggression theory of domestic violence adds another distinction to LGBT domestic violence. In essence, this theory opines that human beings can become violent when their goals are blocked. For gay male and female abusers, this theory is painfully true. Throughout childhood, before sexuality begins to develop, gay youngsters, like everyone else, think about and plan their future selves. They negotiate a life path within the frames of family, community, society, and the culture in which they live.In early adolescence, when sexuality comes to the fore and one’s homosexuality is questione d, those dreams of family and community begin to feel too exclusionary. This can be a time of tremendous stress; the sense of being inherently different and â€Å"bad† can be overwhelming. All the evils about homosexuals one has likely heard in the media and around the family can be internalized, and begin a pattern of self-hate and destruction. All adolescents ask the question, â€Å"Who am I? †, but for the adolescent homosexual it becomes increasingly more difficult to recognize that one is not necessarily growing up to be the person he originally imagined.And the person he is becoming is reduced to villainy by mainstream America. He begins to realize that many of his life goals are blocked, like marriage and basic human rights. Without a strong support system to negotiate and redefine his identity, this can be a traumatic and damaging experience. But family support is often lacking and positive gay role models are scarce. Coming out in adolescence is often a terrif yingly alone experience that can damage the soul and lead to frustration and anxiety that will carry on into future relationships.Coming to terms with second-class citizenship in the families, communities, and society in which he has imagined himself so abundantly different can result in frustration and feed the self-hate that has already started seeping in. And anger develops when certain fundamental goals are blocked. With such rite-of-passage circumstances as these, it is no wonder that domestic violence happens in 39% of gay male relationships (Merrill, pg. 44). A psychological aspect that contributes to the escalation of Domestic Violence in the LGBT community can be associated with the term heterosexism.Many use the term heterosexism to describe an individual who strongly believes in heterosexual relationships. Heterosexual relationships are described as being attracted to the opposite sex and being in intimate contact with only the opposite sex. Heterosexism is used in correl ation to negative attitudes, bias, and discrimination of those who favor same sex relationships. The reason why this term is becoming associated with same-sex relationships that involve domestic violence is due to the use of power and control related to the term heterosexism.The power and control that ensues from heterosexism being used could be easily be described as â€Å"outing the victim in the abusive relationship. † One gathers an idea of the victim’s â€Å"out† status within the individual’s work, friends, and family relationships. Inquiring if the victim has told those he or she cares for about his or her sexual preference usually does this. Knowing this information is beneficial to the abuser because it will allow the abuser to control what the victim will say to the police, or anyone, about any abuse that would exist in the relationship.The contradiction of this term would exist within the abusers identity. The abuser would use the victimâ€℠¢s fear of exposure against that individual as if it would be a bad thing to come out to those who care for and love the victim. The abuser will use ideology related to bigotry slanders, faith, natural law, or popular beliefs as a weapon to keep this victim in the cycle of abuse. Same-sex female domestic violence is an unspoken problem in the lesbian, bisexual, transgender population.Facts about lesbian domestic violence, myths within the population and services are all misconceived reasons why female domestic violence is such a big issue. There is not a lot of data on female same-sex domestic violence. Therefore, most information is taken from heterosexual domestic violence cases and small population samples from the lesbian community such as women’s festivals and lesbian cruises. Within the lesbian, bisexual, transgender community domestic violence is taboo. A fact from the Lesbian Partner Violence Fact Sheet is 17 – 45 % of lesbians have reported being involved in a t least one case of abuse (Rose, 2000).Lesbian victims of abuse are fearful of speaking out for reasons of being judged and pushed out by the lesbian community as a whole. The lesbian, bisexual, transgender communities within a certain area can be small. Unpleasant public allegations ostracize the person and take away community support. Lesbians have few choices of where and how to get help and support, yet the numbers of lesbians affected by domestic violence is about the same as the number of female victims in heterosexual couples (Pattavina, 2007).Types of abuse in female same-sex domestic violence is similar to heterosexual couples, such as hitting, pushing, slapping, disrupting sleep, having sex when one doesn’t want to, and not talking to one another. Behaviors in female same sex domestic violence also include â€Å"jealousy, controlling, becoming involved too quickly, unrealistic expectations, blaming others for their feelings, and hypersensitivity† (rainbowdome sticviolence. itgo. com).A difference is that in a small-knit community, fear of losing support from family and friends isolates and potentially prevents the victim from getting help or even reporting the abuse (Hassaouneh, 2008). But the fear of being â€Å"outted† if that partner is recognized in public, at work, or by the family as being a lesbian is a homophobic fear that hampers the victim in leaving or getting support (Hassouneh, 2008). There is also the isolation within minority groups of lesbians, bisexuals, and transgenders.Lesbians often have less support in terms of cultural, ethnic, and religious background to turn to in time of difficulty, like domestic violence (Pattavina et al. , 2007). Especially in cultures where women are not as valued as much as men, it can lead to feelings of discrimination within one’s own community. There is a myth among the lesbian community that a utopia exists. The myth about â€Å"lesbian utopia† is that women are sensi tive, nurturing, caring, and get along better because of those reasons. Lesbian utopia is just that, a myth. Women do hit, hurt, and violate other women.Another myth about female intimate partner couples is that there is a more masculine â€Å"butch† woman and a more feminine woman in the relationship. That is not always the case. Yet another myth is that the â€Å"butch† or masculine women is the batterer. Again that is not always the case. A big myth is that female same-sex violence is not as dangerous or serious as heterosexual or gay male couple’s domestic violence (Hassouneh 2008). Violence is violence regardless of who perpetrates it. Female intimate partner abuse is under-reported (McClennen and Gunther, 1999).Many lesbians are afraid of losing the only support system they have (Miller et al, 2000). It may be that the perpetrator is their only support system and there is no knowledge of whom or where to turn for help. Then there is the lesbian who does re port and she, the victim, ends up getting arrested (Hassouneh, 2008). The misinformation among law enforcement about how to identify the victim in same-sex domestic violence cases is not always cut and dry (Miller et al. , 2000). There are perpetrators that act as victims.The larger of the two women may get arrested even if she is not the masculine one in appearance. Or the more masculine-appearing woman does get arrested although she may be the victim. There are not always services for women who are lesbian, bisexual, or transgender in the community (Hassouneh, 2008). Either, shelters don’t accept women from the lesbian, bisexual, transgender community or there is no legal standing within the state to substantiate a crime. Many states do not recognize same-sex relationships therefore there are no laws in regards to protection.Many victims in female intimate partner relationships may have experienced violence from a heterosexual relationship in the past. Also â€Å"lesbian i ndividuals are more likely to experience domestic abuse at the hands of their partners than to be exposed to antigay violence perpetrated by strangers† (Pattavina et al. , 2007). A study done by Blaise Fortunata and Carolynn Kohn (2003) of 82 participants, 25 being batterers and 57 non-batterers, states batterers were more likely to have been victims of sexual and/or physical abuse in their childhoods. Also, there was a higher use of drugs and alcohol among batterers.The study suggested some personality traits a batterer would have, such as â€Å"antisocial, aggressive, borderline, paranoid and delusional† (Fortunata and Kohn, 2003). These traits would be seen as lacking in the areas of â€Å"poor boundaries, impulse control, problem solving, affect regulation, along with fear of abandonment, jealousy, low self esteem and an inflated sense of entitlement† (Fortunata and Kohn, 2003). Although Harvey Wallace, the author of the class textbook, would say that there a re not any specific characteristics that would describe an abuser. Wallace then goes n to cite factors by other researchers that backup what was depicted in the Fortunata and Kohn study. Factors or characteristics such as the abuser having â€Å"abuse in the family of origin, low self-esteem, male superiority, authoritarian personality and copes by minimizing the abuse† are Wallace’s (2008) examples. The first step in getting treatment as a victim is to accept that the victim is a victim. Reaching out for help, looking up shelter phone numbers and calling them, or getting a plan together for when the victim needs to get out are some good first steps (rainbowdomesticviolence. itgo. com).Educate the victim in how to create a safety plan by putting personal items such as birth certificate, credit cards, and medications all together so one can leave quickly (rainbowdomesticviolence. itgo. com). Have clothes and hygiene products available in the car or at a friend’s house. Give the victim time to regroup. Her life has been turned upside-down, and the healing process will take a while. When examining homosexual relationships, meaning male-to-male relationships, we see that studies as a whole indicate they have higher rates of promiscuity and violent behavior than heterosexual couples.We must rely on studies for more accurate rates of domestic violence in homosexual couples because much of the abuse is under-reported. Under reporting is due to largely the same reasons we have discussed about why lesbian victims fear asking for help from law enforcement, friends, or family. The American Journal of Public Health has published a detailed study of domestic violence victimization in the homosexual community. It focused on four geological areas, San Francisco, Los Angeles, Chicago, and New York. The study resulted in 2,881 complete interviews (Merrill, pg. 23).In these interviews the men answered highly personal questions under strict confidentiality. This was a large groundbreaking study that has been the cornerstone of homosexual domestic violence research. It was revealed that 39% of those studied reported being battered by their spouse at least once in the last five years. This figure was much higher than heterosexual women victimizations at 11. 6% (Merrill, pg. 44). Men infected with the AIDS virus were more at risk for psychological and physical abuse than their HIV negative peers, and were more likely to be victimized in a sexual manner (Merrill, pg. 1). Solid research like this helps to open our eyes to a real problem with homosexual domestic violence, and it needs to be addressed. We need to de-sensitize law enforcement officials and set up more support for homosexual victims and therapy for perpetrators. There is a direct link between high rates of promiscuity and partner violence because cheating is common. Having multiple partners outside of the relationship can dilute the quality of the relationship; furthermore, it blurs boundary lines. Promiscuity commonly leads to jealousy, which in turn leads to emotional and physical abuse (Cruz, pg. 60). The sexual relationships of gay males are plagued with domestic violence, just as lesbian and heterosexual relationships are. There are many similarities and differences when considering the factors that go into domestic violence when looking at gay males versus lesbians and heterosexuals †¦ lets take a look at a few of them. As discussed before, lesbians have a fear of being â€Å"outted† when others are alerted to the abuse happening in their relationships. Gay males who have not fully come out of the closet have this same fear, which may cause them to not report abuse by their spouses.However, HIV rates run much higher in the gay male population than in the lesbian population, and perpetrators have been known to blackmail their victims with the threat of revealing their HIV- positive status (Cruz pg. 164). In terms of law enforcement and ho w it often handles cases of LGBT domestic violence, they stereotypically see the bigger or more masculine partner as the perpetrator, which often times sends the victim to jail. Police are primarily responsible for enforcing domestic violence laws. Legal agencies, in general, are conservative, and many don’t try to conceal their homophobia.This trait begins with the police, and goes up through criminal justice system. The DA’s, judges, and probation officers have their own social biases, which often do not support gay and lesbian victims. This is especially problematic for criminal prosecutors who enforce victim protection orders. The patriarchal nature of our society makes it difficult for law enforcement to enforce domestic violence laws. This heterosexual bias also reflects the resistance of the prosecution and judicial systems to prosecute same-sex offenders. The vagueness of the mandate to law enforcement personnel allows a great deal of discretion on he part of t he individual officer in the disposition of a domestic violence investigation. â€Å"The lack of systematic training on this issue for police officers heightens the idiosyncratic enforcement of laws. The unpredictable nature of the police response represents a significant deterrent to reporting domestic violence among gay/lesbian/bisexual families. This occurs despite the fact that as a matter of policy, preferred arrest policies do exist in many states and localities. These policies suggest that the preferred response to a report of battering is to make the arrest. There are many resources designed to support the LGBT community. Yet, in researching policies of domestic violence issues, one will find one story after another about the fear surrounding reporting these instances to authorities. It appears that these networks provide the majority of support for many issues, and that those in the LGBT community cannot and perhaps, should not report instances of domestic violence to the police. In conclusion, it is important to remember both the similarities and the differences between heterosexual and LGBT domestic violence.Despite the fact that the same dynamics of power and control are evident in both forms, the sexual orientation of the partners, the effects of the battery, and certainly, whether there are ample helping resources should the victim decide to reach out have everything to do with how the perpetrator chooses to maintain that control. It is essential that we recognize domestic violence in all our communities. And it is essential that we build community-specific strategies to end domestic violence in all its forms.

Explain the process of counseling in detail

The initial interview describes the first contact with the client who is the individual in need of counselling. It completes the intake process, a sort of admission of the client into the formalities of counselling. Importance of the Initial Interview: The initial interview is of much importance for several reasons: 1) It helps the counsellor get to know the client better, and make appropriate plan for intervention.These plans include taking up the client for counselling or referring the client to another, appropriate, treatment service. 2) It helps the client to get to know the counsellor etter, and to obtain reassurance and even crisis support, when necessary. 3) It affords the counsellor the opportunity to explain the nature and goals of counselling, and to agree upon the practical arrangements for counselling with the client. In short, the initial interview will help the client and the counsellor to begin the process of understanding and accepting one another.The initial intervie w normally should proceed along the following lines: 1) Statement of the problem in clear, unambiguous terms 2) Systematic evaluation of the problem, its causes and its effects 3) Identification of circularity 4) Feedback to the client 5) Evaluation of the client's motivation for counselling 6) Clarification of expectations 7) Setting of goals 8) Establishing a contract 9) Making the practical arrangements for counselling. Let us examine each of these steps that will enable us to actually understand the process involved.Statement of the problem in Clear, Unambiguous Terms More frequently, their thoughts are muddled, and heavily laden with emotional content. Clients do not say, â€Å"l am anxious†, or â€Å"l am depressed†. Instead, they frequently commence with an account of what happened, where and when and how. Often, a client comes for counselling because he has been compelled to do so by a family member, friend, or well-wisher. Such clients are, more often than not , unlikely to cooperate whole-heartedly with counselling.Clients sometimes have difficulties in complying with the practical arrangements for counselling; for example, they may reside too far away, or may not be able to obtain leave from work. A greater problem, however, is that many clients are unwilling to make the personal or life-style changes that are necessary if they are to benefit from counselling. For . example, a husband, ho is convinced that all his problems originate in his wife's behaviour, may not be willing to accept that he is responsible in many ways for them, and that he needs to make certain changes in his attitudes and behaviour if his marriage is to survive.Or, while a drug addict may realize that his addiction is ruining his life, he may not be willing to give up the company of the friends who are encouraging him in his deviant habits. It is important that the client realizes that the counsellor can only facilitate change; the client must make the primary effor t. Breaking maladaptative habits is difficult. Making life-style changes is difficult. The client must be willing to make the necessary efforts with the guidance of the counsellor. It is important, for several reasons, to assess motivations that led the client to seek counselling.If the counsellor understands that the client is poorly motivated for counselling, he can provide an appropriate feedback to the client. Then, in consultation with the client, he can arrive at a pragmatic decision concerning whether or not to proceed with counselling. If a client shows poor motivation and the counsellor decides not to go ahead with counselling, he saves for himself, and his client, a lot oftime. He also saves himself a lot of heartburn; had he proceeded with therapy, and had the client shown poor progress, he would in all likelihood have blamed himself, or questioned his competence.If a client shows poor motivation and the counsellor does decide to proceed with therapy, he would probably se t far more modest goals than he would have had the client been more motivated. It may be noted here that the evaluation of motivation is an ongoing process. A client may begin counselling enthusiastically but may later weaken his resolve when he realizes what behavioural changes are necessary. Clarification of Expectations The counsellor needs to find out what the client expects from counselling.Some clients tend to believe that once they tell the counsellor their problems, it is the counsellor's responsibility (and not their own) to fmd the solutions. Some clients believe that the counsellor will magically work out solutions for problems that have existed for years. The counsellor should, right from the early stages of counselling, put his client on guard against unreasonable expectations, such as expectations of dramatic cures, total cures, one-sided compromises, etc. From a practical perspective, t is imperative to ascertain what the client believes will occur during counselling. Some clients believe that the counsellor will put them on a couch and psychoanalyze them. Other clients believe that the counsellor will ask questions about their childhood. Doubts, misconceptions and myths that clients come with should, General goals of counselling are to reduce emotional distress, to reduce dysfunctional behaviour, to promote adaptation, to develop potentials, and to assist in decision-making. After obtaining a general understanding of the client's problems and expectations, specific goals of therapy need to be set.The counsellor needs to guide the client in the setting of specific goals because the client is quite likely to be uncertain of what may be expected from counselling. Such goals are best explicitly stated as specific emotional and behavioural changes that are acceptable and desirable to the client and to society. Thus, an ethical element exists in all goal- setting exercises. It is important to break down important goals into their logical sub- componen ts or sub-goals, which, by virtue of such identification, are more easily tackled.For example, when engaging in marital counselling, goals may be stated as follows: 1) Mrs. A should feel less depressed. 2) Mr. & Mrs. A should improve their understanding and cooperation on the following issues: a) Disciplining of their children; b) Distribution of household responsibilities; c) Sex d) Relationship with the in-laws etc. Stating goals in such a specific manner may generate a long, laundry-like list; however, there is no bar to the number of goals as long as all the goals are specific, clearly defined, reasonable, and attainable.

Historical Background and Status

Historical background and status of textile engineering industry By: S. Chakrabarty Preamble Industrial Revolution in U. K. during 1750 – 1850 gave birth to Textile Machinery. The dominance of India in the field of cotton textiles produced by very skilled manpower was disturbing the British. Systematic development of textile industry with spinning and powerloom machinery was initiated in Lancashire and Manchester to discourage the Indian weavers. Rest is however known to everybody how the machinery industry was developed and nurtured by the respective Governments in the UK and later by Germany and Switzerland followed by others in Europe.In India, machinery manufacture started in the 50s, continued and progressed during 60s & 70s and thereafter. The Government policy to ban expansion of the organized weaving sector during late 60s created/ supported the decentralized powerloom sector. Too much of importance to handlooms and low level technology power looms in the subsequent ye ars, keeping a large list of reserved items for handlooms, throttled the mill industry which lost its initiative for creativity as well as production for the masses. Low level of production in handlooms and low quality production in powerlooms made us uncompetitive in the subsequent years.The Government’s regulative pressures on the Mill Industry continued to play havoc for the weaving industry till the introduction of 1985 Textile Policy and finally revolutionary Industrial Policy in 1991. Development and technology growth in the TEI The Textile Engineering Industry (TEI) during the late 60s, 70s and 80s had received some Government support in the form of foreign collaboration approvals, import assistance by way of phased manufacturing programme and concessional customs duty certification for imported parts and components for manufacture of specified textile machinery.Import duty on components and parts in general was very high at 85% excluding CVD and not conducive for indi genous development. The concessional duty on imported parts, components etc. mentioned above did help the Industry. The then Government’s policy was also supportive that no import of machinery was allowed if there was adequate indigenous production. The local textile industry therefore had no choice but to buy the Indian machinery. This policy helped the TEI to develop and manufacture spinning machinery in the country of the desired quality and quantity. There was no competition from outsider.Internal competition among various players made the development easier and faster. Foreign manufacturers had no choice but to enter into collaborations with local manufacturers. This happened not only in spinning but also in processing machinery. The following collaborations are worth mentioning: Sr. No. 1 2 3 4 5 6 7 8 Names of Foreign Collaborators M/s. Textile Machinery Makers Ltd. U. K. , Platt Bros. , U. K. M/s. Whitin Machine Works, U. S. A. M/s. Howa, Japan M/s. Zinser, Germany M/ s. Marzoli, Italy M/s. Hispani Suiza (Suisse) S. A. , Switzerland M/s. Rieter, Switzerland M/s. Schubert & Salzer, Germany Names of IndianManufacturers M/s. National Machinery Mfrs. Ltd. , Bombay* M/s. M M C. , Calcutta M/s. Texmaco, Calcutta* M/s. Texmaco, Calcutta* M/s. M M C, Bangalore* M/s. Indequip Engineering Ltd. , Ahmedabad M/s. LMW, Coimbatore M/s. New Standard Engg. Items Produced Spinning – Cards, Draw Frame, Speed Frame, Ring Frame Spinning – Carding Engines and RH Can Fed Inter Frames Spinning – Flat Revolving Carding Engines, Draw Frame, Speed Frames Spinning – Narrow Gauge Ring Frame Spinning – Entire Range Spinning – Ring Frame Spinning – Entire range Spinning – Blow Room, Cards, 9. M/s. Zinser, Germany M/s. Trutzschler, Germany M/s. Toyota, Japan 10 11 2 M/s. Suessen, Germany * Presently not in operation Co. Ltd. , Mumbai* M/s. Padmatex Engg. , Baroda* M/s. Trumac, Ahmedabad M/s. Kirloskar Toyoda Textile Machin ery Pvt. Ltd. , Bangalore M/s. Suessen Asia, Pune Draw Frames Spinning – H. S. Draw Frame Spinning – Blow Room, Cards, Draw Frames Spinning – Ring Frame Spinning – Ring Frame Due to acute and long recession in the Textile Industry, initial higher import content coupled with high rate of import duty, non-transfer of latest technology under collaboration agreements leading to import of machinery etc. , the following Indian Companies were closed down during 80s and early 90s.These are M/s. MMC, Kolkata and Bangalore; M/s. Texmaco, Kolkata; M/s. Indequip Engineering, Ahmedabad; M/s. New Standard Engg. Co. Ltd. , Mumbai; M/s. Mafatlal Engg. Co. Ltd. Mumbai; M/s. Textool Co. Ltd. , Coimbatore; M/s. Jeetstex Engg. Ltd. Coimbatore etc. while M/s. LMW, M/s. Trumac, M/s. Zinser India, M/s. Suessen Asia, M/s. Kirloskar Toyoda could manage to stay in production. Why we are better in spinning machinery? There was Government support by way of†¢ †¢ †¢ Res tricted import of spinning machinery – virtually no import of spinning machinery of the same technology available indigenously was allowed.No import of second hand spinning machinery was allowed. Import duty concession on raw materials, parts, components & accessories for production of specified machinery as the import duty in general, was very high. Besides, competition among the machinery manufacturers resulted in production of better quality machines. Reasons for non-development in the Weaving Machinery Sector While the Textile Engineering Industry took up manufacturing of Spinning machinery in full swing with the adequate Government's supportive measures mentioned above, the same did not happen in case of weaving machinery.During 60s (prior to 1970) the Industrial Policy prohibited the organized mill sector to expand their weaving capacity. This was perhaps to support employment generation in the villages by the decentralized and dispersed handloom sector. It was due to t his wrong policy, the unauthorized powerloom clusters started gaining grounds. Even many of the handloom clusters started converting into powerlooms. Since the domestic demand for fabrics was growing fast due to the population growth, the powerloom sector in different parts of the country started growing fast while the handloom sector started shrinking in reality. The fact is still not accepted by the Government). Today, there are over 20 lakh powerlooms but handlooms, may not be more than 8 lakh, if not less! During 70s the organized mill sector was allowed to replace ordinary powerlooms by automatic looms and shuttleless looms on 4:1 basis. However, compulsory manufacture of controlled cloth by the mills sector dampened the spirit of the mills sector. Controlled cloth scheme was done away with during 80s. Expectation of a good demand due to replacement policy prompted the manufacture of automatic looms by M/s.Cimmco, Gwalior in collaboration with M/s. Sakamoto, Japan and M/s. Mafa tlal Engineering Co. in collaboration with M/s. Ruti, Switzerland during 70s. In the late 70s M/s. Lakshmi Automatic Loom Works Ltd. (LALW) started manufacturing Ruti `C’ Type of automatic loom in collaboration with M/s. Ruti, Switzerland. M/s. Cimmco as well as M/s. Mafatlal Engineering Co. tried to manufacture shuttleless looms in collaboration with M/s. Dornier, Germany, Toyoda, Japan and M/s. SACM, France respectively during early 80s. M/s. LALW also started making shuttleless rapier and airjet looms during 80s.During 80s, the powerloom population which was hardly 7 lakh had grown to more than 10 lakhs. The policy of scrapping of powerlooms of the mill industry after replacement or closure failed miserably, all these powerlooms found their way to the decentralized sector. The Government had no option but to regularize all unauthorised powerlooms due to political pressure after announcement of 1985 Textile Policy and subsequent Textile Control Order 1986, doing away with t he age old powerloom permit system. The textile strike during 1980s crippled the Textile mill industry in Mumbai and Maharashtra.During this period the composite structure of the mill industry broke almost completely. While the spinning sector prospered with the modern machinery, the number of working looms in the organized mills sector shrunk considerably and most of the mills found it profitable to close down their weaving section due to bad market condition, high cost of labour, low productivity and tough competition from the powerloom sector. As a result, there was practically no demand for the shuttleless looms manufactured by the two Companies mentioned above which prompted them to close down their shutters one by one.In the meantime, due to the pressure from the decentralized powerloom sector the Government was forced to allow import of second hand weaving machinery which added to the woes of indigenous manufacturers of shuttleless looms. M/s. LALW also had to discontinue the production of shuttleless looms subsequently. During 80s and upto 1991 there was protective market for spinning and processing machinery but not for the weaving machinery due to high production cost and import of second hand looms. Initiatives discouraged after liberalizationThe Industrial Policy announced in 1991 liberalised the Industry in general to a considerable extent. The market became open to the foreign manufacturers and there was tough competition. The spinning machinery makers came of age technologywise and capacitywise and there was also very high demand for spinning machinery. The weaving machinery could not prosper due to the onslaught of import of second hand machinery. There was no restriction on import of second hand weaving machinery before and after 1991. After 1992, there was no support of the Government either for development of weaving machinery or any other textile machinery.In this regard, the only commendable fact was that we became self-sufficient in Weavi ng Preparatory Machinery viz. High Speed Sectional Warping, Direct Warping and Sizing matching with world class technology. M/s. Rabatex Industries, Ahmedabad; M/s. Prashant Gamatex Pvt. Ltd. , Ahmedabad, M/s. Amritlakshmi Machine Works, Mumbai and M/s. Jupiter Engineering Co. , Ahmedabad are the most reputed domestic manufacturers. This could happen because there was less import of second hand machinery and the cost differential between domestic and imported machinery was large and the machines were custom built.The indigenous shuttleless looms (older technology) which have been developed during the late 90s and early 2000, however, could not find a good market due to the adverse policy of the Government i. e. import of second hand shuttleless looms under concessional duty and also under concessional rate of interest under TUF. The situation continues. However, indigenous machinery manufacturers viz. M/s. Aalidhra Weavetech Pvt. Ltd. , Surat; M/s. Bhavin Sales Corporation, Surat; M /s. Dynamic Loom Mfg. Co. , Ahmedabad; M/s. Dinkier Sokerjee Machines, Surat; M/s. Friends Engg.Works, Panipat; M/s. Himson Textile Engg. Inds. Pvt. Ld. ; Surat; M/s. Industrial Engg. Works, Bangalore; M/s. Lakshmi Automatic Loom Works Ltd. , Coimbatore; M/s. Laxmi Textile Stores, Ahmedabad; M/s. Lifebond Machines Pvt. Ltd. , Surat etc. have developed and are producing crank beat up type shuttleless looms with a speed between 450 – 500 mpm. All latest generation shuttleless looms i. e. Airjet, Waterjet, Projectile & Rapier of European and Japanese origin are high speed, high tech, high productive and energy efficient running at a speed of 500 rpm and above.This machinery, though at a higher cost, is economically viable due to its quality and productivity, cost of fabric per meter being less than second hand machinery. Since last 4/5 years, all new large textile units as well as existing reputed textile units expanding capacity had been importing these kinds of machinery to ma ke them commercially viable, e. g. Alok Industries, Welspun, GHCL, Vardhman Group, Century, Raymonds, etc. Therefore, machinery, if made/developed indigenously need to be cost competitive in all respects and cost of production per meter of fabric should be same or less with equivalent quality standard.Then only the manufacturing would be viable and accepted by the Mill Industry/ Organized Sector. Unless there are disincentives for second hand machinery, there is no hope that the decentralized powerloom sector would go in for new machinery. Processing & Finishing Machinery Sector The history of the processing machinery manufacturing sector was somewhat different. During 70s and 80s there were a number of foreign collaborations : M/s. Mather & Platt, U. K. M/s. Reggiani, Italy M/s. Stork, Holland M/s. Gerber, M/s. Menzel and M/s. Eduard Kusters, GermanyMather & Platt (I) Ltd. * SBM Engg. * ATE (Stovec/Stormac*) Calico Indl. Engineers* M/s. Artos & Benninger, Germany M/s. Famatex, Germ any M/s. Obermeaier, Germany M/s. Toshin Kogyo, Japan * Presently not in operation T. Maneklal* Famatex India Ltd. * Dalal Engg. Star Indl. Engg. * Some Companies developed machinery by copying the imported technology viz. M/s. Harish Textile Engineers, M/s. SM Engg. etc. As mentioned earlier, composite structure of the textile industry broke in Europe during 70s. The same happened in India during 80s. This affected the processing sector.While spinning industry became more organized, competitive and export- worthy, the weaving and processing sectors became uncompetitive, decentralized and export unworthy. Since the Government encouraged low technology for the weaving sector (handlooms and ordinary powerlooms), the organized weaving sector in the mill industry could not come up. Similarly, the decentralized processing sector, which started with second hand machinery from the composite mill industry, did not modernize the units in course of time. The domestic manufacturers which had o llaboration prior to 1991 could not continue with their collaborators after 1991 as the market became open and the foreign manufacturers found it easier to market their machines in India rather than making the same under collaboration. During 80s as well as 90s strenuous efforts were put in by some of the Companies to develop machinery by way of re-engineering. Some of them became successful. However, some of the Companies had to close down their shutters due to tough competition in the open market after 1991. Many manufacturing units came into existence to produce low technology cheap machinery to bridge the gap between demand and supply.This had resulted in manufacture of poor quality machines and poor quality processing of textiles thereof. The encouragement given by the Government to the hand processing sector was misused and low technology prevailed. The prominent processing machinery makers who developed quality machines during 80s and 90s were: 1. M/s. Calico Indl. Engineers, Mumbai* 2. M/s. Dalal Engg. Pvt. Ltd. , Mumbai 3. M/s. Devrekha Engineers, Surat 4. M/s. Harish Textile Engineers Ltd. , Mumbai 5. M/s. Mather & Platt (I) Ltd. , Mumbai* 6. M/s. Primatex Machinery Ltd. , Mumbai* 7. M/s. SLM Maneklal Ind. Ltd. , Mumbai* 8. M/s.SM Energy & Electronics, Mumbai 9. M/s. Standard Fabricators (I) Pvt. Ltd. , Mumbai 10. M/s. Stovec Industries Ltd. , Ahmedabad 11. M/s. Texprint Engineers Pvt. Ltd. , Ahmedabad * Presently not in operation In the latter half of 90s again saw acute demand recession from the Textile Industry which continued upto 2002. During this period the Textile Engineering Industry started looking beyond the domestic demand. Export which was never more than Rs. 100 crore until 1988-89 started increasing and reached the level of Rs. 406 crore during 2002-03. There were exports of spinning as well as processing machinery.Some of the manufacturers could compete with the European manufacturers in processing machinery abroad with their high qual ity machines. Improved Demand The demand for textile machinery started picking up slowly after 2002 as the Technology Upgradation Fund Scheme became popular by then. The Textile Industry was also expecting a better market after the st liberalized Quota Free Regime under WTO from 1 January, 2005. Major demand for machinery started after 2004 which has prompted the Textile Engineering Industry to increase its production from the level of Rs. ,341 crore during 2003-04 to Rs. 2,780 crore during 2006-07. However, this happened mainly in spinning machinery and weaving preparatory machinery and to some extent in weaving and processing machinery. The weaving and processing machinery sectors though increased their capacity to a considerable extent, has a long way to go. The processing sector started competing with foreign manufacturers since 1991 though sporadically. They have improved their technology and their machines are now capable of producing fault free processed fabrics in short as w ell as continuous lots.The domestic demand for such machinery has also increased. M/s. Dhall Enterprises & Engineers Pvt. Ltd. , Ahmedabad, M/s. Harish Enterprises Pvt. Ltd. , Mumbai, M/s. Tex-Fab Engineers (India) Pvt. Ltd. , Navi Mumbai produced continuous dyeing plants with latest technology for long length of fabric processing which are running successfully in the mills. The following manufacturers have exported their processing machines and earned a good name: 1. 2. 3. 4. 5. 6. 7. M/s. Dalal Engineering Pvt. Ltd. , Mumbai M/s. Devrekha Exports (Bhagyarekha Engineers Pvt. Ltd. ), Surat M/s.Dhall Enterprises & Engineers Pvt. Ltd. , Ahmedabad M/s. Harish Enterprise Pvt. Ltd. , Mumbai M/s. Kusters Calico Machinery (P) Ltd. , Vadodara M/s. Lakshmi Card Clothing Mfg. Co. Pvt. Ltd. , Coimbatore M/s. Yamuna Machine Works Pvt. Ltd. , Mumbai These manufacturers are in a position to make many high quality processing machines and compete with foreign manufacturers. Knitting/Hosiery Machine ry Knitting/Hosiery Industry as well as Garment Industry was reserved for the small scale sector. Both these sectors thrived initially with imported second hand machinery.Both Woven Garment and Hosiery Garment put together the total export of the country was only Rs. 5 crore during 1970-71. The exports increased to Rs. 500 crore in 1980 and today it is above Rs. 17,000 crore, thanks to the removal of quota shackles under WTO, implemented by the Government couple of years back. Decentralised character of the Garment industry did not enthuse the TEI to take up the manufacture of knitting machinery. As such this sector remained neglected altogether. Some efforts were made to manufacture knitting machinery by two Companies viz. M/s.Lakshmi Automatic Loom Works Ltd. , Coimbatore and M/s. Himson Textile Engineering Industries Pvt. Ltd. , Surat in late 80s. However, after liberalization of the Industrial Policy in 1991, imported machines became cheaper technology wise than the Indian machi nes due to which obviously there was no demand. Therefore, manufacture of knitting machinery had to be discontinued. Testing & Monitoring Equipments Sector As regards the Testing & Monitoring equipments are concerned, the textile industry was dependent on imported testing and monitoring equipments in 60s and early 70s.The Textile Engineering Industry started developing such testing & monitoring equipments in the late 70s and today all kinds of high quality latest generation testing and monitoring equipments are being manufactured in the country. Some of the items are: †¢ †¢ †¢ †¢ †¢ Air Jet Weaving Machine Controller Centralised Computerised Operation of Group of dyeing Machines with Dyeing Data Management Software Package Fully Automatic High Volume Fibre Tester for Length, Strength, Micronaire, Colour, Trash and Maturity module Multi-Channel Pre-Set Yarn Length Indicator & Controller for Winding/Texturising/TFO Machines with Software PackageYarn Evenness T ester Some names of the Companies manufacturing different categories of such instruments are under:†¢ †¢ †¢ †¢ †¢ †¢ Paramount Instruments Pvt. Ltd. Pioneer Instruments & Innovations Premier Evolvics Pvt. Ltd. Semitronik Instruments Tex Lab Industries Thymas Electronic Pvt. Ltd. Growth of the Parts & Accessories Sector The growth of the textile industry along the length and breadth of the country initiated the manufacture of parts and accessories for their machinery. Today, barring a few critical items of equipments and accessories lmost all kinds of parts and accessories of high quality are manufactured in the country. The number of such manufacturers could be around 800. Some of the important items manufactured here are: Blow Room beaters, card clothing, cross-roll attachment for cards, top rollers for high speed draw frame, flyers for speed frames, rings, spindles, inserts, cots and aprons and variable drives for ring frame, production of monitoring data in spinning and weaving online quality checking systems, cloth guides, web straighteners in processing, etc. etc.The TEI not only fulfills the demand for spares from the domestic textile industry but also exports its products to Asia, Africa, the Middle East, Far East, Europe, America and other countries as well. The following table shows data on production of Textile Machinery Parts & Accessories during the last 15 years: Year 1985-86 1990-91 1999-2000 2004-05 2006-07 Rs. in Crores 83. 43 208. 59 288. 79 276. 44 339. 68 Synthetic Yarn and Fabric Processing Machinery Sector Synthetic weaving sector of the textile industry which was scattered in different parts of the country in early 70s became localized in Surat, Bhiwandi, Belgaum.During 80s and 90s the synthetic sector was dominantly established in and around Surat, Gujarat. This simultaneously necessitated the development of synthetic yarn and fabric processing machinery. As a result the Textile Engineering Industry located in and around Surat and Mumbai developed draw texturising machines, draw twisters, two-for-one twisters for filament yarn, zero-twist filament sizing machines, rewinders, precision cone winding machines, etc. etc. More successful manufacturers are M/s. Himson Textile Engineering Industries Pvt. Ltd. , M/s. Aalidhra Textile Engineers Pvt. Ltd. Meera Industries, etc. The synthetic mechanical processing machinery was being imported during 70s and 80s. However, with the development of such machinery indigenously, we are not only catering to the domestic demand but also exporting the same. More and more developments are taking place due to the demand for such machinery. Conclusion Thus the Textile Engineering Industry could develop all types of textile machinery except garment machinery, high speed sophisticated knitting machinery, high speed shuttleless loom (rapier and air jet) and some of the latest generation processing and finishing machinery.The reasons for not developing these mac hinery have been categorically explained in the foregoing paras. What the TEI expects and aspires Under the above background it is felt that there is a real need to develop and manufacture all kinds of textile machinery in the country as per the existing and expected demand. Government should encourage these efforts and should come forward to help this Rs. 3,000- 4,000-crore capacity industry in a comprehensive and systematic manner with short and long term policy measures. It should take note of the developments of textile machinery made by China during the last 10 years.What China did? 1. Forced the foreign manufacturers to start manufacturing their brands in China by not allowing the import of machines from abroad. 2. Financed the domestic manufacturers for setting up the complete plants with large capacities. 3. No second hand machinery import 4. Incentives given for replacement of old machinery with new machinery. Incidentally, it may be mentioned that China had 6 lakhs ordinar y powerlooms/automatic looms prior to 2002. Today, they have shuttleless looms (2, 50, 000 to 3,00,000 approx. ). There may be few ordinary powerlooms in villages and automatic shuttle looms in some corners.No estimate of such looms is available. They have installed large machinery manufacturing capacities and are also exporting all kinds of textile machinery at a cheaper price. Therefore, the following measures are needed to improve the present condition of the Indian TEI A) Policy Measures †¢ †¢ Scheme for Modernisation, technology upgradation and productivity advancement of the Textile Engineering Industry (TEI). The interest remission under the scheme should be 5% with one time 10% Capital Subsidy over & above interest remission (Similar Schemes are available for the Textile Industry).Scheme to support Research & Development. o o †¢ †¢ †¢ †¢ †¢ †¢ †¢ Suitable capital grants and annual recurring grants for the existing R Centre at IIT, Powai, Mumbai. Suitable capital grants for the R Institutions located at Surat, Ahmedabad, Coimbatore, Delhi, Panipat and Ludhiana willing to take up R for textile machinery. Capital grant for indigenous development of machinery to the new projects as well as existing projects which got delayed due to lack of funds. Tax break/holiday for the manufacture of High Speed Shuttlelesss Looms/High-tech processing and finishing machinery for a period of five years.To allow import of complete sophisticated machinery in CKD/ SKD condition at concessional rate of import duty for a minimum period of three years without any restrictions for manufacturing textile machinery under collaboration/joint venture/import of designs and drawings or by way of reengineering. Ban import of machinery where similar technology machines are available indigenously e. g. shuttleless rapier loom â€Å"crank beat-up type†, water jet Looms (800 rpm) etc. Import of textile machinery in second hand condition sh ould not be allowed under the Technology Upgradation Fund Scheme/20% CLCS Scheme.Ban on import of second hand shuttleless looms with weft insertion rate less than 800 mtrs. per minute. Revival of TIFAC scheme for development of textile machinery with 90% loan component and softer rate of interest of 3%. B) Fiscal Measures †¢ †¢ †¢ †¢ †¢ †¢ Reduction of excise duty from 14% to 8% Excise duty on parts, components and accessories of the machines be reduced to 8%. Maintaining the floor level customs duty on textile machinery at 7. 5% without any exemptions Uniform rate of customs duty for complete machinery and raw materials, parts, components & accessoriesUniform treatment to the domestic suppliers of machinery to EPCG license holders. 150% weighted Income Tax deduction for R expenditure made by the Textile Engineering units. If the above measures are taken seriously, the TEI aspires to make available modern machinery and equipment both in quantum and qual ity to meet the future needs of the textile industry at short delivery periods coupled with effective and prompt after-sales-service. About the Author: The author is the Secretary of The Textile Machinery Manufactures Association.

The presentation of individuals and society in the novel, Dr. Jekyll and Mr. Hyde

Choose two extracts from the novel and use them as a basis for your discussion of one of the following topics: 1. The ways in which places and settings are used in the novel; 2. The presentation of individuals and society in the novel; 3. Stevenson's methods of developing tension and a sense of horror in the novel. For the purposes of my analysis, I have chosen option two: The presentation of individuals and society in the novel. The two extracts that I have chosen for the analysis are: Utterson's first meeting with Mr. Hyde and his subsequent description of him (in the chapter The Search for Mr. Hyde) and an excerpt from the last chapter Henry Jekyll's full statement of the case. In this essay, I am going to discuss how Stevenson presents the individuals and the society in the novel. In order to make a clear interpretation, I am going to be using the novel as well as my background knowledge of the time and context in which the novel was set. I will also review Stevenson's experiences, which might have led to the creation of the story. Firstly, I will examine the society presented by Stevenson in this novel. The entire story revolves around the upper/middle class. There are only hints of other social classes in the form of workers and servants, employed by the rich people. The four main characters of the play have much in common; they are all rich, well-educated and professional men: Utterson is a lawyer; Enfield is a well known man around the town, showing his popularity. Lanyon and Jekyll are both doctors, which shows their high professional status. Another trait that all these men have in common is, they are all cold and distant yet likable. Also, they are all un-married. Below is an extract from the book, outlining Mr. Utterson's personality: Mr. Utterson the lawyer was a man of rugged countenance, that was never lighted by a smile; cold†¦backward in sentiment†¦ and yet somehow lovable. Another interesting fact regarding the novel is, not one of the main characters is a woman, this shows the nature of the society. The society at the time was a male-dominated one. Some have argued that this gives the novel an empty feel. Readers agree that, the severe lack of women from the settings creates unease in the novel, which can be felt slightly. This particular writing trait that Stevenson employs can be linked back to his own childhood, Stevenson had a strong father figure and thus, the imbalance in sexes is noticeable in the writing. In the novel itself, each of the characters face a varying dilemma. Utterson seems at peace with the world and doesn't want a wife whereas, Jekyll seems to change into Hyde because he is sexually frustrated. Jekyll is one character who would be content with a wife. Here, another flaw in the society seems visible; Stevenson's subtle language sets up the male-only society in order to push Jekyll into becoming Hyde. Stevenson exasperates Jekyll and through his tactical writing, he also thoroughly entertains the readers. The main character of the novel seems to be Mr. Utterson. Stevenson writes the novel from Utterson's perspective, events of the novel and the story-line itself is viewed through Utterson's eyes. For example, when the reader first learns about Hyde, it is from Utterson's detailed description. Automatically, the reader then perceives Hyde as Utterson does. The readers are also inclined to feel the same emotions Utterson feels regarding Hyde: †¦the hitherto unknown disgust, loathing and fear in which Mr. Utterson regarded him (Hyde). The interesting factor is that Utterson is never the narrator of the proceedings in the novel. However, he is always involved in some way, even in the scenes where he has no direct role. Another interesting factor is that even though Stevenson doesn't employ Utterson as the narrator, he tailors him with narrator like features: he is calm, considerate and usually emotionless. Stevenson uses him to great effect towards the end, he surprises the readers by turning the passive character of Utterson, suddenly into an active member of the novel. The author reveals the other side of Utterson's character as being decisive and strong, and this allows the reader to be further interested in the novel: I must and shall see you†¦ if not by fair means than by foul – if not of your consent, then by brute force! Another key character in the novel is Dr. Lanyon. He is only thrust into action when Hyde goes to visit him. Stevenson heightens the drama of the story by not allowing Lanyon to confide his experiences to Utterson and the readers. The reader is made desperate to know what Lanyon refers to as: it could kill a man by its mere presence. The reader later gathers that he is referring to Hyde. After Lanyon watches Hyde transform to Jekyll, Lanyon's whole demeanour changes to a dying man, but he never reveals the cause for his sudden ill-health: I have had a shock and I shall never recover. It is a question of weeks†¦ There could be two possible reasons why Lanyon doesn't reveal the truth; he may believe that by divulging the details he may tarnish the old friendship between himself and Dr. Jekyll. However, this reason doesn't seem very likely because the friendship between the two was long lost. Below is a perfect example, showing that the friendship is long gone (Jekyll's thoughts about Lanyon): †¦that hide-bound pedant, Lanyon, at what he called my scientific heresies. The second simpler reason could be that, Lanyon believes even if he did divulge any details, people would not believe his claims. He is worried that he may be labelled a lunatic, and obviously wants to avoid that predicament. Stevenson has used masterly language in order to construct the characters of Dr. Jekyll and Mr. Hyde. His language clearly conveys them as two separate people yet it also outlines the gigantic difference between them. Early on in the story, Jekyll informs the readers about his theory regarding Hyde: Man is not truly one but truly two. Throughout the novel, Stevenson conveys Hyde as the lower instinct and id form of Jekyll. The author wants the readers to believe that Hyde is a selfish, animal side of Jekyll. This strange phenomenon could be linked back to Stevenson's childhood. In that circumstance Stevenson being the mischievous child representing Hyde and Stevenson's father being upstanding and respected, representing Jekyll. Hyde also seems to rebel with Jekyll like Stevenson did with his father. Stevenson wanted to be an author, but his father was against such a career but Stevenson became one anyway: Jekyll had more than a father's interest; Hyde had more than a son's indifference. To make the novel a success, the foundations must be strong; this relies on the fact that the reader perceives Jekyll and Hyde, as Stevenson wants him to. The author wants the characters to be completely different, yet be the same person, and to convey this Stevenson uses descriptive language: (Jekyll) Every mark of capacity and kindness†¦ AND A large, well-made, smooth-faced man of fifty†¦ On the other hand, there is a stark appearance between Jekyll's description and Hyde's: (Hyde) He had borne himself with a murderous mixture of timidity and boldness AND There was something wrong with his appearance; something displeasing, something downright detestable. Now as we can understand from the above quotations, Stevenson uses alliteration to convey the descriptions of both the characters. Some examples are- downright detestable; murderous mixture. This vivid language leads the reader to believe in Jekyll and Hyde. The author conveys Hyde as being completely opposite of Jekyll, even through the name. Hyde is a monster hidden within Jekyll. The more dramatic interpretation would be conveyed as a struggle between good and evil. It seems clear that Hyde is always present in Jekyll: at the start of the novel he just hasn't been released and thus, Jekyll had complete control of the situation. The problem arises when Jekyll starts taking the metamorphic potion; at this point Hyde emerges and begins to take control. It's clear that Hyde gains strength from the actions of Jekyll; this point is further enhanced if the reader concentrates on Hyde's appearance. Hyde doesn't seem to be a tall person, and thus his character is not strong enough to challenge Jekyll. However, Hyde's continued nourishment through Jekyll's weaknesses means that eventually Hyde becomes increasingly potent: The balance of my nature might be permanently overthrown†¦ and the character of Edward Hyde become irrevocably mine. This revelation proves that, the metamorphic potion is truly a changing potion, it reverts Jekyll to a weaker character of Hyde. Once Jekyll starts taking the potion, the characters of Jekyll and Hyde become vague and unclear: it even seems that both the characters want to be separate. An example of that is when Jekyll refers to Hyde as him not I. From Jekyll's language it seems that Hyde is no longer a part of Jekyll but someone else. Finally, Jekyll explains that the character of Hyde is completely different; in a sense Jekyll lets Hyde do whatever he pleases, without the fear of consequences or society: †¦ the liberty, the comparative youth, the light step, leaping pulses and secret pleasures that I had enjoyed in the disguises of Edward Hyde. Thus, the position of Hyde in the novel is grotesque and mysterious. He stands apart from the rest of the society; he is ugly, disturbing and unlovable. So, Jekyll is able to enjoy two positions in the society, one being in the centre and the other being on the extreme edge. In conclusion, Stevenson conveys both his own rebelling and then escaping aspects in the novel. Stevenson rebelled by roaming the streets of Edinburgh at night and then escaped to Samoa. Stevenson also constructs the society to an odd proportion, by placing no women in it; this seems to reflect a classical hypocritical Victorian society. However, throughout the novel the atmosphere seems to be perfect for the Jekyll/Hyde situation and thus, makes the novel a fantastic read.

Analysis Of Sweat By Zora Neale Hurston English Literature Essay

Analysis Of Sweat By Zora Neale Hurston English Literature Essay All through literature and stories, words and characters will always represent different meanings and symbols. Readers will continue to venture deeper and deeper into the meanings of the words a writer puts on paper. The writer of the story may not even have a deeper meaning to the writing but we as humans have a need to explore. The short story known as â€Å"Sweat† by Zora Neale Hurston may also be one of those types of stories. The short English literature story â€Å"Sweat,† written by Zora Neale Hurston, shows Sykes as the husband of the leading character Delia in the story. During the story it seems as though Sykes gets easily upset and angered at his wife Delia.  Ã‚  Sykes takes his frustration out on Delia all throughout the story by hurting her physically, cheating with another woman, and teasing her with one of her biggest frights, which are snakes.  Ã‚  Even though Sykes’ behavior should not be accepted or followed, he possibly could show signs of a mental problem that is not fully addressed or dug into during the story. Sykes may also feel threatened because Delia is the sole provider of the house. He wants to feel as if he still has the â€Å"man† power and control over the marriage. More often than once he tries to take Delia and make her feel lesser to him as he feels it should be.    During this time many women may have backed down after being yelled at or threatened by their husbands but Delia did not back down however. She took a stand against Sykes by saying to him,†Mah tub of suds is filled yo’ belly with vittles more than yo’ hands is filled it.  Ã‚  Mah sweat is done paid for this house and Ah reckon Ah kin keep on sweatin’ in it† (Hurston 408). In the story the reader can almost tell and feel that Sykes also does not want to be reminded that he was unsuccessful in making a complete family or the fact that he has failed to take care and provide for his family. Betty Nosa m writes in the book, â€Å"Sweat, Looking for a Man`s place†, â€Å"In Sweat, the husband named Sykes is frequently exposed to his let down and failures to provide for his family, his wife by her recurring talks of ‘her’ carriage, pony, other physical items† (Nosam 66).   Hollering, screaming and yelling all seem to fail, which will make Sykes feel the need to resort to other means of making Delia listen, violence.  Ã‚  All Through the story Sykes will be threatening Delia and informing her that he will hit her physically in one way or another. Author of the book,  forming a Straight punch with a curved fist, Loren Bruckheimer, will explain how, â€Å"Zora Neale Hurston uses descriptions of the whip to propose a people of manliness expressed in an over powering nature and deeply seeded in ethnic tyranny† (Bruckheimer 44).  Ã‚  This would imply that Sykes hits Delia only because the only way of manliness that he has known is the kind that th e white townsmen seem to portray.

Typical developmental pathways of Speech Language and Communication Essay

Typical developmental pathways of Speech Language and Communication - Essay Example The developmental pathways of speech, communication, and language start from when the child is about three months to when he or she is about three years, that is thirty-six months. By this age, the child has developed the basic skills and can communicate and understand some words. During the development of these three skills, in case a certain developmental concern is observed, intervention is critical. This is because it is easier to resolve problems related to these skills at early ages, however if the concerns are left untreated, the child may suffer from language, and speech impairments that affect the childs ability to use language learned later. It also affects how they learn new things, and how they behave in their later childhood and adolescence The pathways to child development are in ten groups from when the child is three months to when he or she is thirty-six months. In the third month the child should be able to, maintain eye contact, coo, goo, and smile, and cry differently for different needs, for example, when tired or hungry.in the third to sixth month the child is able to smile and quiet when spoken to. From six to nine months, the child should begin bubbling, express feelings and vocalizes to gain attention, the child should also be able to turn the head in order to follow sound and notice toys. The third stage of typical developmental pathways falls from nine to twelve months, at this stage the child can consistently respond to the own name when called, looks at familiar people and objects when mentioned. At this stage, the child can also follow routine commands associated with gestures, from twelve to fifteen months the child imitates speech sounds and understands up to fifty words. From fifteen month to the twenty-fourth months, the child shows improved skills in speech language and communication. From the twenty-fourth month onwards the child